Years ago, you could get away with all sorts of vehicle modifications and no-one would blink an eye.
Drop the suspension, stick in some sports seats and sports steering wheel – no worries.
Sure, modified vehicle owners still fell foul of the law, but those laws and the policing of them were a lot more relaxed.
These days, you can’t assume that you can just do what even seems like a simple modification without the risk of getting a fine, a ‘canary’ (a defect notice), a safety inspection fail or even possibly end up with having an insurance claim denied because of an illegal modification.
The reason this has become so important in recent years is that standard safety features have improved out of sight, and our regulators don’t want owners mucking around with their cars to the point that these safety features don’t work as they should.
Standard safety gear in newer cars will not function properly if components are altered significantly.
An example of this is electronic stability control (ESC); if a modified suspension is fitted, it could affect the operation of the ESC.
We’re laying out the broad sweep of what modifications can and cannot be done in this article. But, as ever, seek clarification from an automotive engineer and/or your local registration authority before doing any such changes to your car.
Laws and their interpretation change over time, and there is also a mountain of mods we simply don’t have the space to cover off here.
Who sets the rules?
The federal government is responsible for setting out the parameters for road vehicle compliance in Australia, under the Australian Design Rules (ADRs).
But the rules have changed since ADRs were introduced in 1970.
For example, a car built to suit the ADRs valid in 1975 doesn’t necessarily have to comply with all the extra ADR requirements of a car built in 2022.
There are also other, often less stringent compliance requirements in place for low-volume or personal used imports, but here we are assuming you want to modify a car already here and registered.
Modifications ultimately come under state and territory government regulations . The regulations require modified vehicles to be fit for use on roads and road-related areas by maintaining compliance with all applicable vehicle standards, including the relevant ADRs and to not increase the risk of injury to the vehicle’s occupants and other road users.
To make sure that there was consistency for technical standards across all jurisdictions, the National Code of Practice (NCOP) for Light Vehicle Construction and Modification (also known as Vehicle Standards Bulletin 14 ) was created in the early 2000s (and has been regularly updated since).
VSB 14 gives a national outline for light vehicle modifications, covering the minimum design, construction, installation and performance requirements, among other things.
This is basically the document that anyone wanting to modify a road vehicle weighing less than 4.5 tonnes should look at first.
While VSB 14 covers off most modifications you can and can’t do in states and territories, when it comes down to the finer administrative points of vehicle registration, obtaining exemptions, obtaining modification approvals, vehicle inspections, preparation and submission of reports and the payment of appropriate fees and charges, it is all up to the individual state or territory.
2019 Kia Seltos Sport+ Auto 2WD MY20
Toyota Landcruiser Prado GXL Auto 2016 4×4
2019 Nissan Navara ST D23 Series 4 Auto 4×4 Dual Cab
2020 Subaru Outback 2.5i Premium 5GEN Auto AWD MY20
2014 Ford Territory TX SZ Auto
2022 Kia Cerato GT Auto MY22
2018 Holden Astra LS+ BK Auto MY18
2023 Volkswagen T-Roc 140TSI R-Line D11 Auto 4MOTION MY23
2014 Volkswagen Golf 118TSI VI Auto MY14
2015 Volkswagen Touareg V8 TDI R-Line 7P Auto 4MOTION MY15
Zobrazit všechny zásoby
What parts of a car can I change without notice?
There are basic things that you can change on a car without having to seek approval, such as suspension, wheels, tyres and seats – but only up to a point.
While you might not need approval for a certain mod, any such change must not end up causing other safety-related problems.
For example, if you fit new wider wheels and tyres that meet all the measurement requirements laid out in VSB 14, but the wheels or tyres end up scraping on the body or suspension, then you could still end up with a defect notice.
Lowering or raising suspension is allowed, so long as it is by no more than one third of the original suspension travel, and provided original height is not increased or decreased by more than 50mm.
For separate-chassis 4x4s, you can install a body lift kit , so long as the vehicle is not more than 50mm higher than stock.
Sports shocks and sway bars for any vehicle is also okay, while retrofitting a factory power steering system (typically for older vehicles where power steering was an option) is also permitted.
All vehicles sold in Australia since 1972 have a tyre placard fitted, nominating tyre specifications for that vehicle. If your vehicle tyre size has become obsolete, you can buy replacements of another size without needing certification provided that the load rating is not less than for the original tyres, and that tyre speed rating is a minimum of ‘S’ (180km/h) where the original tyres had a higher rating.
Off-road tyres is another area. If you own a 4×4 – typically the ADR NC category, so we’re talking Toyota LandCruiser and the like, not soft-roaders like the Toyota RAV4 – you can have tyres with a minimum speed rating of N (140km/h).
For any non-standard light-vehicle tyre replacement, they must be no more than 26mm smaller or 15mm larger in overall diameter than the original equipment tyres.
For off-road passenger or goods vehicles, the tyres must not be more than 50 per cent wider than the originals.
Wheels can be replaced , so long as they don’t increase overall track width by more than 25mm for cars and 50mm for 4x4s (vehicles classified as MC, NA and NB under the ADRs).
An interesting requirement that might trip up some is when using wheels and tyres fitted to a manufacturer’s sports model on another variant. Under paragraph 4.2.7, VSB 14 says you must also change the suspension components, such as springs, shocks and sway bars.
So if you throw on some Peugeot 308 GTi wheels on your base-model 308 Access, you must also replace the Access suspension with the 308 GTi’s suspension.
Steering wheels can be replaced, but it has to be marked as complying with ADR 10 (after 1970) or ADR 69 (after June 1995). For an ADR 69 vehicle, this concerns driver head protection in a frontal crash, which usually resulted in an airbag steering wheel being fitted at the factory.
So if you want to put another steering wheel on, it has to be either an identical airbag steering wheel or a factory option for that particular car.
No replacement steering wheel should be less that 330mm in diameter, and removable steering wheels are not allowed.
You can also replace seats in the vehicle, but only with those optional for the same make and model, and that are basically bolt-in (no modifications to the seat or seat base).
So for example, if your car is a base model with manually-adjustable cloth seats, you could fit the optional factory sports seats offered by the manufacturer to the Australian market.
Items like seat belts and other safety features can’t be downgraded as a result of the swap. So if your vehicle had side airbags in the seats, the replacement seats must also have them, and be compatible with the car’s existing airbag deployment system.
Aftermarket window tinting is also okay to do without getting certification, but here you really need to check with your state of territory. Window tinting requirements are under the Australian Vehicle Standards Rules (AVSR), which apply to all vehicles no matter when they were built.
The feds do suggest in VSB 14 that there has to be a minimum 70 per cent luminous transmittance for windows in front of the front seats (windscreen and front side windows) and minimum 35 per cent for those behind the front seats (except for Northern Territory only, where it is 15 per cent minimum at the rear).
T tinted strip is allowed on the windscreen, so long as it covers no more than 10 per cent of the windscreen upper area and does not enter the area of glass where the windscreen wipers sweep.
VSB 14 also says you need to have a mirror on both sides of the vehicle if you are getting tinted film, which might trip up owners of older cars which had just a driver’s side mirror fitted.
It is also illegal to have reflective window tint film (that is more than 10 per cent reflective), and bubbled or distorted window film that impairs visibility.
What mods do I need approval for?
There are plenty of more extensive mods you can have done, but they will need a licensed certifier to inspect your modifications and then issue a compliance certificate, provided that they are satisfied the modifications comply.
Depending on what you’re modifying, this certification can cost about $600 – or much more. It’s a good idea to keep a copy of any such approval in your car in case you are pulled up.
If you want to lift a 4×4 ute or off-road wagon between 50mm and 150mm, you’ll need certification under LS codes.
If you want to fit seats out of another production vehicle that had approved seats in it, you’ll need certification under the LK codes.
Under the sub-section titled ‘ National Guidelines for the Installation of Electric Drives in Motor Vehicles ’, VSB 14 also covers what may become in time a common conversion: an internal combustion vehicle powertrain substituted with an EV powertrain.
There are many requirements for such electromodding, such as safety markings for high voltage, safety for power disconnection, windscreen demisting capability and much more.
The upshot of all this is don’t assume even the simplest modification is straight-forward and street-legal.
Although the ability for enthusiasts to legally modify our vehicles is still alive and well, the legal restrictions make changing vehicles from their standard specs more complex than ever.
Car modifications checklist:
Undertaking what seems even a minor modification can end up being illegal and cost you a fine or even insurance claim denial.
Make sure you read the relevant parts of Vehicle Standards Bulletin 14 before attempting any mods.
The final word on modifications comes from your state or territory registering authority such as RMS or VicRoads – check with them before doing any changes.
You can change some items without certification such as window tinting, suspension, tyres, wheels and seats – but only up to a point.
Other more significant mods can be done, but they will need a certified engineer to approve and sign off on the modification.
Aktuálně si prohlížíte naše nástěnky jako host, což vám poskytuje omezený přístup k prohlížení většiny diskuzí a přístupu k našim dalším funkcím. Tím, že se připojíte k našemu uvolnit komunitě budete mít přístup k tématům příspěvků, soukromě komunikovat s ostatními členy (PM), odpovídat na ankety, nahrávat obsah a přistupovat k mnoha dalším speciálním funkcím. Registrace je rychlá, jednoduchá a zcela zdarma, proto prosím, připojte se k naší komunitě ještě dnes! Bannery na levé straně a dole se registrovaným uživatelům nezobrazují!
| REVscene Automotive Forum > Automotive Chat > Police Forum | ||
| Stretch tires and negative camber, is that illegal? | ||
| Policejní fórum Police Head Mod: Skidmark Questions & info about the Motor Vehicle Act. Mature discussion only. |
| Jdi na stránku. |
RS controls my life!
Datum připojení: prosinec 2002
Umístění: 604
Poděkovali jsme 254krát v 58 příspěvcích
Stretch tires and negative camber, is that illegal?
My car got a vi and its flush with stretched tires and camber is that illegal?
| Originally posted by Jason00S2000 BTW, this is Revscene, not Oprah, where are the insults and racism in the above post?! |
Ricer Mod
Založen: Mar 2005
Location: Smithers
Příspěvky: 7,008
Poděkovali jsme 5,276krát v 1,501 příspěvcích
It doesn’t matter if it’s illegal or not you got a VI and there isn’t a damn thing you can do about it.
If the tires are stretched and beyond what the manufacturer recommends then yes. it’s a fail. If the tires touch the fender, it’s a fail.
__________________
President of RS Beat Down Crew
My dinner reheated before my turbo spooled
Připojit Datum: listopad 2010
Location: New West
Příspěvky: 1,732
Poděkovali jsme 893krát v 231 příspěvcích
Side slip of the front wheels shall not exceed 9 m per 1.6 km as measured on the alignment gauge.
The caster, «camber» or toe-in of a vehicle shall not be out of adjustment to the extent that it is apparent visually.
if an officer deems your car unsafe to drive, you are fucked.
Last edited by s300ae; 03-11-2011 at 06:09 PM .
racing & tech mod.
Datum připojení: květen 2004
Místo: Vancouver
Příspěvky: 4,034
Poděkovali jsme 507krát v 188 příspěvcích
There is no specific empirical measurements for the limit of tire stretch or camber or toe. It’s all subjective, based on whether or not the officer feels the vehicle is unsafe to operate.
A safe ‘rule of thumb’ is that is the tires would rub against the fender lining if you hit a bump in the road — it’s illegal.
Lets see a pic of the car.
Rs has made me the woman i am today!
Založen: Apr 2003
Místo: Vancouver
Příspěvky: 4,032
Poděkovali jsme 2,165krát v 594 příspěvcích
Původně odeslal s300ae
Side slip of the front wheels shall not exceed 9 m per 1.6 km as measured on the alignment gauge.
The caster, «camber» or toe-in of a vehicle shall not be out of adjustment to the extent that it is apparent visually.
if an officer deems your car unsafe to drive, you are fucked.
the part about the camber being being adjusted to the point where it’s visible by naked eye is that for real s300?
if so what a moronic rule, for example the higher model BMW X5’s with the super wide 325 series tires are running at least -2 camber in the rear, i can spot that with my naked eye, and it comes that way from the factory! can’t stand double standards, really grinds my gears
a Berzerker your point of stretching beyond manufacturer recommendation, I guess to put it in perspective my OEM tires are 225 front and 245 rear. so i mean me for example year my tires are stretched a bit, but for fcks sake i’m running 255’s in the front and 285’s in the rear, so that’s a LOT more tire than even OEM specs. there is no way a cop can use that argument against me for example for obvious reasons..
the tires hitting the fenders definitely hear you on that one, that shit is dangerous
__________________
( o O . ___/ . O o ) ( ECD — wheels) // Satin Cocaine White
Last edited by G-spec; 03-14-2011 at 11:49 PM .
My dinner reheated before my turbo spooled
Připojit Datum: listopad 2010
Location: New West
Příspěvky: 1,732
Poděkovali jsme 893krát v 231 příspěvcích
its all about the officers’ discretion.
if he wants to nail you for something, or has no real ground to pull you over, he can do it for camber.
same goes if once pulled over for something else, and youre a complete dick to the officer, he can pile on a few tickets including the visible camber.
now, ive been pulled over frequently, but no one has made a comment about my camber yet. the MVA is too large to know every single infraction.
now, given your argument it comes from the factory like that, you will be correct. if you can prove that, you will win the ticket. however, not a lot of cars come with camber from the factory.
It’s like going crazy when you’re already nuts
Připojit Datum: srpen 2005
Příspěvky: 5,811
Poděkovali jsme 2,858krát v 741 příspěvcích
I thought the rear camber on the X5’s was cus of noob drivers lulz
Publikováno přes RS Mobile
RS Peace Officer
Založen: Feb 2007
Location: Vancouver Islan
Příspěvky: 3,867
Poděkovali jsme 1,636krát v 683 příspěvcích
Want to talk about negative camber. take a look at the Triumph Spitfires from the 60’s and 70’s. The rear wheels tucked in when unloaded and spread out when heavily loaded.
Retired Traffic Cop
Založen: Oct 2001
Location: Nanoose Bay, BC
Příspěvky: 9,025
Poděkovali jsme 125krát v 68 příspěvcích
Old Volkswagen Beetles did that too.
__________________
Have you ever met anyone that would admit to being less than a better than average driver ??
I WANT MY 10 YEARS BACK FROM RS.net!
Založen: Jan 2006
Location: Abbotstan
Příspěvky: 20,721
Poděkovali jsme 12,136krát v 3,361 příspěvcích
__________________
Původně odeslal Godzira
Does anyone know how many to a signature?
Původně odeslal Brianrietta
Not a sebberry post goes by where I don’t frown and think to myself «so. »
To me, there is the Internet and there is RS
Založen: Apr 2007
Location: Okanagan
Příspěvky: 16,072
Poděkovali jsme 8,738krát v 3,782 příspěvcích
Původně odeslal G-spec
the part about the camber being being adjusted to the point where it’s visible by naked eye is that for real s300?
if so what a moronic rule, for example the higher model BMW X5’s with the super wide 325 series tires are running at least -2 camber in the rear, i can spot that with my naked eye, and it comes that way from the factory! can’t stand double standards, really grinds my gears
a Berzerker your point of stretching beyond manufacturer recommendation, I guess to put it in perspective my OEM tires are 225 front and 245 rear. so i mean me for example year my tires are stretched a bit, but for fcks sake i’m running 255’s in the front and 285’s in the rear, so that’s a LOT more tire than even OEM specs. there is no way a cop can use that argument against me for example for obvious reasons..
the tires hitting the fenders definitely hear you on that one, that shit is dangerous
it’s not about the tire width, it’s about the sidewall stretch. If the sidewall is stretched too far then it can be illegal.
__________________
1991 Toyota Celica GTFour RC // 2007 Toyota Rav4 V6 // Jeep Grand Cherokee 2000
1992 Toyota Celica GT-S [«sold»] 2007 Jeep Grand Cherokee CRD [sold] 2000 Jeep Cherokee [sold] 1997 Honda Prelude [sold] 1992 Jeep YJ [sold/crashed] 1987 Mazda RX-7 [sold] 1987 Toyota Celica GT-S [crushed]
