Hyundai Kona 2023 Vehicle Auto-Shut Off and Intelligent Variable
The 2023 Hyundai Kona’s Intelligent Variable Introduction and Auto-Shut Off are cutting-edge methods of maximizing fuel economy and engine efficiency. These features highlight Hyundai’s dedication to environmentally friendly and cost-effective driving. Examples of this cutting-edge technology are Intelligent Variable Transmissions (IVTs) and automated engine shut-off during idle periods. When the car is stopped, as at a stop sign, the Auto-Shut Off feature cleverly pauses the engine to cut down on pollution and wasteful fuel use. In the meantime, by continuously modifying gear ratios to suit driving situations, the IVT improves driving dynamics and fuel efficiency. Hyundai’s commitment to a cleaner and more efficient driving future is demonstrated by these engine management advancements in the 2023 Kona.
Vehicle Auto-Shut Off
Pokud je vaše vozidlo zaparkováno a motor je ponechán zapnutý po dlouhou dobu, motor se automaticky vypne, aby pomohl snížit spotřebu paliva a zabránil nehodám způsobeným otravou oxidem uhličitým.
Operační podmínky
Časovač automatického vypnutí vozidla funguje, když jsou splněny všechny následující podmínky:
- Vehicle speed is below 1.8 mph (3 km/h), and the gear is shifted to P (Park)
- Brzdový pedál a pedál plynu nejsou sešlápnuté
- Bezpečnostní pás řidiče je odepnut
- Sedadlo spolujezdce je prázdné
- The infotainment system is not being updated
Podmínky deaktivace
Časovač automatického vypnutí vozidla se vypne, když nastane jedna ze situací:
- Vehicle speed is above 1.8 mph (3 km/h)
- Převodový stupeň je zařazen na R (zpátečka), D (jízda) nebo N (neutrál)
- Je sešlápnutý pedál brzdy nebo pedál plynu
- Bezpečnostní pás řidiče je zapnutý
- Spolujezdec je na sedadle spolujezdce
Provoz systému
When all the conditions are satisfied, the Vehicle Auto-Shut Off operates and turns the engine off automatically after 60 minutes. A timer appears on the instrument cluster 30 minutes before vehicle shut off.
Resetování časovače clusteru
Chcete-li resetovat časovač clusteru, proveďte jednu z následujících akcí:
- Po dokončení automatického vypnutí vozidla uvolněte pedál plynu nebo brzdový pedál.
- Stiskněte tlačítko OK na volantu, když se na sdruženém přístroji objeví časovač.
POZOR
Nenechávejte v horkém počasí ve vozidle spolujezdce nebo zvíře, protože systém klimatizace se vypne, když je motor vypnutý.
Intelligent Variable Transmission
- Depress the brake pedal, press the shift button ahead of the shift lever, and then move the shift lever. Press the shift button, then move the shift lever. Move the shift lever.
Intelligent Variable Transmission Operation
The Intelligent variable transmission has no actual fixed gears. The varying gear ratios are selected automatically, depending on the position of the shift lever, the vehicle’s speed and the position of the accelerator pedal. The indicator in the instrument cluster displays the shift lever position when the ignition switch is in the ON position.
VAROVÁNÍ
Chcete-li snížit riziko vážného zranění nebo smrti:
- ALWAYS check the surrounding areas near your vehicle for people, especially children, before shifting a vehicle into D (Drive) or R (Reverse). Before leaving the driver’s seat, always make sure the shift lever is in the P (Park) position, then set the parking brake, and place the ignition switch in the LOCK/OFF position. Unexpected and sudden vehicle movement can occur if these precautions are not followed. Do not use engine braking (shifting from a high gear to a lower gear) rapidly on slippery roads. The vehicle may slip causing an accident.
P (park)
Always come to a complete stop before shifting into P (Park). To shift from P (Park), you must depress firmly on the brake pedal and make sure your foot is off the accelerator pedal. If you have done all of the above and still cannot shift the lever out of (Park), see “Shift-Lock Release” in this chapter. The shift lever must be in P (Park) before turning the engine off.
VAROVÁNÍ
Shifting into P (Park) while the vehicle is in motion may cause you to lose control of the vehicle. After the vehicle has stopped, always make sure the shift lever is in P (Park), apply the parking brake, and turn the engine off. When parking on an incline, shift the gear to P (Park) and apply the parking brake to prevent the vehicle from rolling downhill. Do not use the P (Park) position in place of the parking brake.
R (zpětně)
Tuto polohu použijte pro jízdu s vozidlem vzad.
OZNÁMENÍ
Před zařazením nebo vyřazením z R (zpátečky) vždy úplně zastavte; můžete poškodit převodovku, pokud zařadíte R (zpátečku), když je vozidlo v pohybu.
N (neutrální)
The wheels and transmission are not engaged. Use N (Neutral) if you need to restart a stalled engine, or if it is necessary to stop with the engine ON. Shift into P (Park) if you need to leave your vehicle for any reason. Always depress the brake pedal when you are shifting from N (Neutral) to another gear.
VAROVÁNÍ
Nezařazujte rychlostní stupeň, pokud nemáte nohu pevně na brzdovém pedálu. Řazení převodového stupně, když motor běží ve vysokých otáčkách, může způsobit velmi rychlý pohyb vozidla. Mohli byste ztratit kontrolu nad vozidlem a narazit do lidí nebo předmětů.
D (Drive)
This is the normal forward driving position. The transmission will automatically shift to the optimal gear ratio, providing better fuel efficiency and a smoother ride. For extra power when passing another vehicle or driving uphill, depress the accelerator further until you feel the transmission downshift to a lower gear. The DRIVE MODE switch, located on the shift lever console, allows the driver to switch from NORMAL mode to SPORT mode. For more details, refer to “Drive Mode Integrated Control System” later in this chapter.
Režim manuálního řazení
Whether the vehicle is stationary or in motion, manual shift mode is selected by pulling the shift lever from the D (Drive) position into the manual gate. To return to D (Drive) range operation, push the shift lever back into the main gate. In Manual Shift mode, moving the shift lever backward (B) and forwards(A) will allow you to select the desired range of gears for the current driving conditions.
+ (Up) : Push the lever forward(A) once to shift up one gear.
– (Down) : Pull the lever backwards(B) once to shift down one gear.
Informace
Only the eight forward(A) gears can be selected in Manual Shift mode. To reverse or park the vehicle, move the shift lever to the R (Reverse) or P (Park) position as required. Downshifts are made automatically when the vehicle slows down. When the vehicle stops, 1st gear is automatically selected. When the engine rpm approaches the red zone the transmission will upshift automatically.
Shift-lock systém
To shift the transmission from P (Park) into R (Reverse):
- Sešlápněte a podržte brzdový pedál.
- Start the engine or place the ignition switch in the ON position.
- Přesuňte řadicí páku.
Shift-lock release
If the shift lever cannot be moved from the P (Park) position into R (Reverse) position with the brake pedal depressed, continue depressing the brake, and then do the following:
- Place the ignition switch in the LOCK/OFF position.
- Zatáhněte parkovací brzdu.
- Carefully remove the cap (1) covering the shift-lock release access hole.
- Insert a tool (for example, flathead screwdriver) into the access hole and press down on the tool.
- Move the shift lever while holding down the screwdriver.
- Remove the tool from the shift-lock release access hole then install the cap.
- Depress the brake pedal, and then restart the engine.
If you need to use the shift-lock release, have your vehicle inspected by an authorized HYUNDAI dealer immediately.
Ignition key interlock system
The ignition key cannot be removed unless the shift lever is in the P (Park) position.
parkování
Always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, apply the parking brake, and place the ignition switch in the LOCK/OFF position. Take the Key with you when exiting the vehicle.
VAROVÁNÍ
When you stay in the vehicle with the engine running, be careful not to depress the accelerator pedal for a long period of time. The engine or exhaust system may overheat and start a fire. The exhaust gas and the exhaust system are very hot. Keep away from the exhaust system components. Do not stop or park over flammable materials, such as dry grass, paper or leaves. They may ignite and cause a fire.
Good Driving Practices
- Never move the shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed.
- Never move the shift lever into P (Park) when the vehicle is in motion. Be sure the vehicle is completely stopped before you attempt to shift into R (Reverse) or D (Drive).
- Do not move the shift lever to N (Neutral) when driving. Doing so may result in an accident because of a loss of engine braking and the transmission could be damaged.
- Driving uphill or downhill, always shift to D (Drive) when driving forward or to R (Reverse) when driving backward, and check the gear position indicated on the cluster before driving. If you drive in the opposite direction of the selected gear, the engine will turn off and a serious accident might occur due to the degraded brake performance.
- Do not drive with your foot resting on the brake pedal. Even light, but consistent pedal pressure can result in the brakes overheating, brake wear, and possibly even brake failure.
- Depressing both accelerator and brake pedals at the same time can trigger logic for engine power reduction to ensure vehicle deceleration. Vehicle acceleration will resume after the brake pedal is released.
- When driving in Manual Shift mode, slow down before shifting to a lower gear. Otherwise, the lower gear may not be engaged if the engine RPMs are outside of the allowable range.
- Always apply the parking brake when leaving the vehicle. Do not depend on placing the transmission in P (Park) to keep the vehicle from moving.
- Exercise extreme caution when driving on a slippery surface. Be especially careful when braking, accelerating, or shifting gears. On a slippery surface, an abrupt change in vehicle speed can cause the drive wheels to lose traction and may cause loss of vehicle control resulting in an accident.
- Optimum vehicle performance and economy is obtained by smoothly depressing and releasing the accelerator.
VAROVÁNÍ
To reduce the risk of SERIOUS INJURY or DEATH:
- ALWAYS wear your seatbelt. In a collision, an unbelted occupant is significantly more likely to be seriously injured or killed than a properly belted occupant.
- Avoid high speeds when cornering or turning.
- Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
- The risk of rollover is greatly increased if you lose control of your vehicle at highway speeds.
- Loss of control often occurs if two or more wheels drop off the roadway and the driver oversteers to reenter the roadway.
- In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes.
- HYUNDAI recommends you follow all posted speed limits.
FAQ
What is the Auto-Shut Off feature in the 2023 Hyundai Kona?
The Auto-Shut Off feature automatically turns off the engine when the vehicle is stationary, such as at traffic lights, to save fuel and reduce emissions.
How does the Auto-Shut Off feature work?
The system typically uses sensors to detect when the vehicle is idling and then shuts off the engine. It restarts the engine when you release the brake pedal or engage the accelerator.
Can I deactivate the Auto-Shut Off feature if I prefer to keep the engine running when stationary?
Many vehicles allow you to disable the Auto-Shut Off feature temporarily if desired, but it may automatically reactivate when you restart the vehicle.
What benefits does the Auto-Shut Off feature offer in terms of fuel economy and emissions reduction?
By reducing engine idling, the Auto-Shut Off feature can improve fuel efficiency and lower emissions, contributing to a more environmentally friendly driving experience.
Does the Auto-Shut Off feature affect the vehicle’s electrical systems, such as the air conditioning or infotainment?
In some cases, the Auto-Shut Off feature may temporarily reduce power to certain electrical systems to conserve energy, but this typically doesn’t impact comfort or safety.
Is there a way to customize the Auto-Shut Off settings in the 2023 Hyundai Kona?
The vehicle may offer settings that allow you to adjust the Auto-Shut Off parameters, such as the duration of engine idling before shutdown.
What is the Intelligent Variable Transmission (IVT) in the 2023 Hyundai Kona?
The IVT is an advanced transmission system that continuously adjusts gear ratios to optimize fuel efficiency and enhance driving performance.
How does the IVT differ from traditional automatic transmissions?
IVT does not have traditional gears; instead, it uses a belt and pulley system to provide seamless and efficient power delivery, eliminating traditional gear shifts.
What advantages does the IVT offer in terms of fuel economy and driving experience?
The IVT typically provides improved fuel efficiency and smoother acceleration by constantly adapting to driving conditions.
Can I manually shift gears with the IVT, or is it fully automatic?
IVTs are usually fully automatic, but some models may offer a manual shift mode for added control.
Is there a break-in period or special maintenance required for the IVT?
The owner’s manual may include recommendations for a break-in period, and regular maintenance is essential to keep the IVT operating optimally.
Does the IVT impact the Kona’s towing capacity or off-road capabilities?
Towing and off-road capabilities can vary depending on the vehicle’s configuration, so consult the owner’s manual for specific guidelines.
How does the combination of Auto-Shut Off and IVT contribute to a more efficient driving experience?
The combination of these features helps reduce fuel consumption both when the vehicle is stationary and during driving, enhancing overall fuel efficiency.
Are there any limitations or considerations when using the Auto-Shut Off and IVT technologies?
Drivers should be aware of how these technologies function and adapt their driving habits accordingly to maximize their benefits.
What is the maintenance schedule for the Auto-Shut Off and IVT systems?
The owner’s manual typically provides maintenance guidelines for these systems, including regular engine maintenance and transmission fluid changes.
Idle Stop and Go was designed by Hyundai to reduce fuel consumption by automatically shutting off the engine when the vehicle comes to a complete stop, such as at a stoplight. This feature is often referred to as the auto stop or auto start stop feature. This feature can be shut off on your Hyundai but by design, you will need to do it every time you start your vehicle. Before we look at how to disable the auto start stop on a Hyundai, let’s look at the ISG system as a whole. There are some prerequisites for the engine to be automatically started by the ISG system.
ISG Activation Prerequisites
In order for the ISG system to operate properly there are some conditions that must first be met:
- The driver’s seatbelt is fastened
- The driver’s door and hood are closed
- Podtlak brzd je dostatečný
- The battery sensor is activated and the battery is sufficiently charged
- The outside temperature is not too high or low
- The vehicle is driven at a constant speed and stops
- Systém klimatizace vyhovuje podmínkám
- The vehicle is warmed up enough
- ISG related parts are working properly
- The incline is gradual
- The steering wheel is turned less than 180 degrees and the vehicle then stops
Automatické zastavení
When these prerequisites from above are satisfied and the ISG is on, the engine will be stopped automatically when these occurrences take place:
- the vehicle speed decreases to 0 mph
- the brake pedal is depressed
- the gear is in Drive or Neutral
When the engine stops the driver will be greeted with the Auto Shop indicator illuminating green on the instrument cluster. The Idle stop will not occur again until the vehicle reaches above 3 mph and returns to the optimal automatic stop conditions. During Auto Stop mode, ISG will be deactivated if the engine hood is opened. If the ISG system is deactivated, the ISG off button will light and message ‘Auto Stop is off.’
Automatické spuštění
When the engine has automatically stopped by ISG it will restart if any of the following actions are initiated
- a release of the brake pedal
- when Auto Hold is activated
- depressing the brake pedal by shifting the gear from Neutral to Drive, Reverse or Park.
The Auto Stop indicator will light up white on the instrument cluster when the engine has restarted.
How To Temporarily Disable ISG
Although, if you don’t particularly care for the Idle Stop & Go feature in your Hyundai, there is an option to disable it. Drivers can simply press the disable ISG button to turn OFF the system.
Unfortunately, this solution is only temporary as Hyundai did not include a way to permanently disable the ISG feature. Drivers will have to annoyingly press this button every time they start their Hyundai if they wish to keep it off and avoid their car restarting at every stop during a drive. Having to press an extra button every time you start your car seems frustrating, because it is.
How To Permanently Disable ISG With Autostop Eliminator
In order to eliminate this extra distraction and overall hassle of having to remember to turn off the ISG system each and every time you step into your car, we have carefully crafted the ultimate solution to your auto start-stop problems with the Autostop Eliminator. You’ll also be excited to hear that this device is an especially easy, one-time install.
The technology of this device is simple yet effective. It does not make any changes to the Hyundai computer system, whatsoever. Instead, it will electronically inform your Hyundai to turn off the ISG feature and keep it off! You’ll no longer have to experience the headache of remembering to disable ISG every time you start your car. However this upgrade is not ‘entirely’ permanent. If you decide that you want to reactivate your Hyundai ISG system you can do so with just a press of a button. Whether you have the ISG on or off, your preference will be remembered by the Autostop Eliminator device so you don’t have to push the ISG button when you start your Hyundai. With the Autostop Eliminator device you will have complete control of when your engine starts and when it shuts off. Most importantly, this device disables the auto start-stop feature in a safe manner, so you won’t have to worry about any mishaps because of a car hack you saw online. You can now enjoy driving your Hyundai without the engine shutting off once and for all!
Get An Autostop Eliminator Today!
We can’t wait to give you some relief and we know you will love all that our device has to offer! Visit the Hyundai page of our website to see if we have an Autostop Eliminator for your Hyundai, like the Hyundai Palisade, and the Hyundai Santa Fe . If you would like more information about the Autostop Eliminator device please visit our website . Many of your questions can be quickly answered by visiting our FAQ section , or you can always feel free to contact us by email if you have any further questions not addressed in our FAQ. Let us help you make your driving experience all that you want and more!
