How do you move the seat forward in a Toyota?

Seat position adjustment lever

For easy access to the rear seat, use the seatback lock release lever or seatback angle adjustment lever. When the seatback lock release lever or seatback angle adjustment lever is used, the seat’s original slide position is memorized, so the seat may be returned to that original position. The seatback will be returned to the fully upright position.

Lift the seatback lock release lever or seatback angle adjustment lever. The

Lift the seatback lock release lever or seatback angle adjustment lever. The seatback will fold forward, and the seat’s slide lock will be released. Move the seat all the way forward.

■Seat slide position memory function (3-door models only)

Slide the seat backward and then lift the seatback. The seat will be set and locked to its previous slide position automatically, and the seatback will be returned to the fully upright position. In the following situations, the seat slide position memory will not be saved or will be overwritten.

●The seatback is lifted upright at a slide position farther forward than the memorized position.
●The seat slide position is memorized when the seat is slid all the way or nearly all the way forward.
●The seat is slid farther back than the memorized position by using the seat position adjustment lever.

■If the seat cannot be returned to the memorized slide position

Lift the seatback lock release lever or seatback angle adjustment lever after removing the luggage, or after having the passenger get out or sit properly so that the seat can be slid back to the previous position.

■Seat adjustment

●Be careful that the seat does not hit passengers or luggage.
●To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
Adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control of the vehicle.
●After adjusting the seat, make sure that the seat is locked in position.
●Never allow anyone to touch seatback lock release levers while the vehicle is moving.
●If anyone is in the vicinity, make sure they are clear of the seat back path and let them know that the seat is about to move.

ČTĚTE VÍCE

Kde je umístěn snímač teploty?

■After returning the seatback to the upright position

Make sure the seatback is securely locked by pushing it forward and rearward. Failure to do so may result in death or serious injury.

■To prevent the seat lock mechanism malfunction

Do not use the seatback angle adjustment lever and seatback lock release lever at the same time. If they are used together, the seat lock mechanism may be damaged.

Přední sedadla

Driver’s seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (if equipped) Vertical height adjustment lever (if equipped) .

Zadní sedadla

The seatbacks of the rear seats can be folded down. Stow the rear seat belt buckles as shown. Stow the seat belts. Center →P. 55 Outside Use the seat belt hangers to prevent the belts .

Viz také:

Stěrač a ostřikovač čelního skla
The wiper operation is selected by moving the lever as follows: Type A Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation .

Front fender apron (ASSY)
REPLACEMENT With the cowl top side panel removed. REMOVAL INSTALLATION Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagra .

Čištění a ochrana exteriéru vozidla
Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehi .

Toyota Yaris. Front Seat

Přední sedadla jsou elektricky vyhřívaná. Zapalování musí být zapnuté.

Press the seat warmer switch to illuminate the indicator light while the ignition is switched ON. The mode changes as follows each time the seat warmer switch is pressed.

Toyota Yaris. Front Seat

OFF
Vysoký
Střední
Nízké

If the ignition is switched off while the seat warmer is operating (High, Mid or Low) and then switched ON again, the seat warmer will automatically operate at the temperature set before switching off the ignition.
Vyhřívání sedadel používejte při běžícím motoru. Pokud necháte vyhřívané sedadlo delší dobu s vypnutým motorem, může dojít k vybití baterie.
The temperature of the seat warmer cannot be adjusted beyond High, Mid and Low because the seat warmer is controlled by a thermostat.

ČTĚTE VÍCE

Jak mohu synchronizovat svůj klíč Kia?

VAROVÁNÍ

Be careful when using the seat warmer

The heat from the seat warmer may be too hot for some people, as indicated below, and could cause a low-temperature burn.

Infants, small babies, elderly people, and physically challenged people
Lidé s jemnou pokožkou
Lidé, kteří jsou nadměrně unavení
Lidé, kteří jsou opilí
Lidé, kteří užívali léky navozující spánek, jako jsou prášky na spaní nebo léky proti nachlazení

Do not use the seat warmer with anything having high moisture-retention ability such as a blanket or cushion on the seat

Sedadlo se může nadměrně zahřát a způsobit nízkoteplotní popáleniny.

VAROVÁNÍ

Do not use the seat warmer even when taking a short nap in the vehicle

Sedadlo se může nadměrně zahřát a způsobit nízkoteplotní popáleniny.

Do not place heavy objects with sharp projections on the seat, or insert needles or pins into it

To by mohlo způsobit nadměrné zahřátí sedadla a způsobit zranění v důsledku lehkého popálení.

Do not use solvents to clean the seat. It may damage the seat surface and the heater.

Bezpečnostní opatření sedadel

When returning a rear seat to its original position, place the seat belt in its normal position. Verify that the seat belt pulls out and retracts. WARNING Make sure the adjustable components of a seat are locked in place Adjustable seats and seatbacks that are not securely locked are dangerous.

Zadní sedadlo

Jiná informace:

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Fuel Pump Control Module Internal Electronic Failure (P064A49)

MONITOR DESCRIPTION The fuel pump control ECU has a self-diagnosis function. If there is an internal malfunction, the fuel pump control ECU sends a malfunction signal to the ECM via the FPC drive circuit. Based on the signal, the ECM judges that there is a malfunction in the fuel pump control ECU stores a DTC.

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Terminals Of Ecu

TERMINALS OF ECU METER MIRROR SUB-ASSEMBLY (a) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. (Symbol) Terminal Description Condition Specified Condition H61-1 (IG) — Body ground Power source for engine stop and start ECU assembly Ignition switch off Below 1 V Ignition switch ON 10.

ČTĚTE VÍCE

Jak odemknete Jaguar XF klíčem?