I was listening to music, and my sound suddenly went dead in all my applications. I’m using Ubuntu 12.04, which uses pulseaudio, so I tried sudo /etc/init.d/pulseaudio restart , but nothing happened. According to lsof | grep pcm , nothing is using the soundcard at the moment, although I’m not entirely sure if my source for that command is applicable. Is there a way another way to restart Ubuntu 12.04’s sound system from the command line without rebooting the system?

23.1k 14 14 zlaté odznaky 67 67 stříbrné odznaky 119 119 bronzové odznaky
zeptal se 20. prosince 2012 v 5:08
Ricardo Altamirano Ricardo Altamirano
3,079 3 3 zlaté odznaky 16 16 stříbrných odznaků 18 18 bronzových odznaků
This answer worked for me. askubuntu.com/questions/15223/…
25. srpna 2014 ve 23:58

I think the solution really depends on the computer you have and the ubuntu version installed on it. For me none of the 2 top answers worked. joeytwiddle’s answer worked. já mám Lenovo Legion Y520 s ubuntu 16.04: sudo pm-suspend is the only thing that worked for me.

3. září 2019 ve 13:05

This is NOT an answer to the question, however, this page show up in the top when searching for how to fix the sound in Ubuntu 18 and 19. When having trouble with the motherboard built-in Intel soundcard, this solution has worked for me: linuxuprising.com/2018/06/… Excerpt: Ubuntu 18: add «options snd-hda-intel model=generic» at the end of the /etc/modprobe.d/alsa-base.conf reboot Ubuntu 18, 19, 20. Kernel 5.3.0-41 and -42: Edit /etc/modprobe.d/alsa-base.conf as root and add «options snd-hda-intel dmic_detect=0» Edit /etc/modprobe.d/blacklist.c

Květen 16, 2020 na 15: 07

10 odpovědi 10

I’ve used pulseaudio -k && sudo alsa force-reload a couple of times, and it worked well. The first part kills pulseaudio, the second reloads ALSA. You don’t need to restart pulseaudio, because it auto-restarts.

odpověděl 20. 2012. 5 v 18:XNUMX
mikewhatever mikewhatever
32.4k 10 10 zlaté odznaky 88 88 stříbrné odznaky 100 100 bronzové odznaky

This helped to me to fix the issue ‘no sound after suspend’ I have suffered from for don’t remember how long.

31. srpna 2013 ve 19:19
Sometimes you might need to clear pulse config with «rm -R ~/.pulse*» before issuing any restart.
23. září 2014 ve 11:33
It works for me after my USB headphone stop to work.
20. října 2014 ve 22:47
pulseaudio -k saved my life ! no sudo needed
Dubna 10, v 2018 21: 15
still work in 18.04
29. ledna 2019 v 18:34

What I do when my sound doesn’t work is

killall pulseaudio 

and then I press Alt + F2 and type in pulseaudio. It usually works for me.

15.1k 4 4 zlaté odznaky 78 78 stříbrné odznaky 119 119 bronzové odznaky
odpověděl 20. 2012. 5 v 16:XNUMX
1,379 9 9 stříbrných odznaků 11 11 bronzových odznaků

What is the difference between this and systemctl —user restart pulseaudio ? The restart worked for me before, but today it did not and I needed to kill it (it seemed to automatically restart, when I typed pulseaudio in a terminal it errored that the daemon is already running).

23. září 2021 ve 12:32

There isn’t much difference in practice. This answer relies on systemd detecting that pulseaudio has crashed and restarting it. Your version does this explicitly.

ČTĚTE VÍCE
Jak mohu zrcadlit svůj iPhone do mého Jeepu?

27. září 2021 ve 7:17

Just for completeness, in newer Ubuntus versions that use systemd, I used this and it worked well:

systemctl —user restart pulseaudio

odpověděl 15. 2019. 20 v 46:XNUMX
751 5 5 stříbrných odznaků 4 4 bronzových odznaků
this answer fixed my problem
21. června 2020 ve 17:23
This is the way to restart PulseAudio in Ubuntu 20. Thank you!
1. listopadu 2020 ve 19:43

This, along with killing/restarting Alsa, allowed me to get the audio working on my Acer Swift 3 (Ryzen 4700U) under Kubuntu 20.10.

12. listopadu 2020 ve 4:46

This answer is very useful since pulseaudio won’t function properly after a session change (or CTRL-ALT-BACKSPACE) in ubuntu 20.04

3. června 2021 ve 14:13
still works in 2023 with an up-to date ubuntu
4. července 2023 ve 7:54

In my case there were nasty messages in kern.log / dmesg :

sound hdaudioC0D2: HDMI: invalid ELD buf size -1 

The solution was simply to suspend and resume the machine!

$ sudo pm-suspend 

odpověděl 23. 2015. 17 v 51:XNUMX
joeytwiddle joeytwiddle
1,927 1 1 21 zlatý odznak 21 27 stříbrných odznaků 27 XNUMX bronzových odznaků

i don’t know what was going on, I also had a mike problem, reinstalled pulseaudio and alsa packages, but the sudo pm-suspend trick did it.

11. srpna 2016 ve 10:33
Battery died on my Dell, did all the above, tried this as a last resort and it worked! Thanks!
9. ledna 2017 v 5:33

Same thing happened here — after battery died, headphones did not work after next boot. pm-suspend fixed it.

24. srpna 2017 ve 16:29

In the last Wifislax(64 2.0)livecd -intoram. The ‘mixer’ dissapeared and OS sound got muted after all I’ve tryed all above none worked only this.

Února 11, v 2019 10: 02
Does someone able to explain this behaiour?
12. března 2019 ve 22:07

For the new multimedia framework Potrubní vedení, which became the default since Ubuntu 22.10, restart the Pipewire services.

❯ systemctl --user restart pipewire.service # if the above is not enough, try ❯ systemctl --user restart pipewire-pulse.service 

27.7k 14 14 zlaté odznaky 113 113 stříbrné odznaky 110 110 bronzové odznaky
odpověděl 11. listopadu 2021 v 20:47
Rahil Wazir Rahil Wazir
309 6 6 stříbrných odznaků 11 11 bronzových odznaků
You should be more clear about what do you mean by «newer version»?
– uživatel545149
8. prosince 2021 ve 19:44
@s.ouchene Thanks, it shouldn’t be a «newer version» I have rephrased it.
27. prosince 2021 ve 12:33

I had exactly the same symptom: sound suddenly died (after trying to use Audacity, in my case). The OP didn’t mention he was/wasn’t wearing headphones, which was my case. I tried all options here and, when going to Preferences and changing to HDMI or Speaker output worked, but switching to Headphones didn’t work (no sound). I then tried to unplug and re-plug the headphones and it worked.

odpověděl 25. 2021. 13 v 07:XNUMX
Alexandre Schmidt Alexandre Schmidt
1,723 14 14 stříbrných odznaků 16 16 bronzových odznaků

I encountered this issue with a USB audio device that would sometimes when booting the machine, not connect properly leaving me without audio until a reboot. If you are someone who is having the same issue but with a USB audio device then I recommend the following which fixed it for me:

sudo rmmod xhci_pci && sudo rmmod xhci_hcd && sudo modprobe xhci_pci xhci_hcd 

None of the other answers would fix it and I assume that came down to the USB device not registering properly on boot. This simply reboots the USB devices. Note: you should only run all commands at once, running sudo rmmod xhci_hcd alone will disable all USB devices e.g., your keyboard, meaning the remaining commands cannot be run.

ČTĚTE VÍCE
Je údržba Hyundai i20 levná?

I will be honest and say that I doubt that the xchi_pci part is necessary, so if someone is more knowledgeable regarding this please correct me.

Audi MMI force restart 2G, 3G, 3G+

58 thoughts on “ Audi MMI force restart (2G, 3G, 3G+) ”

Pingback: Audi MMI welcome screen change (boot logo 2G, 3G) — mr-fix.info
Pingback: Enable MMI hidden green menu (2G, 3G, 3G+) — mr-fix.info
Pingback: Audi MMI battery level status 2G 3G — mr-fix.info
Pingback: Audi MMI 3G bluetooth activation — mr-fix.info
Pingback: Carista Question — AudiWorld Forums
Pingback: 2011 A8L Navigation issue — AudiWorld Forums
ike říká:

Playing music from SD card and it just stops and screen locks up then goes black and comes back on just to do it again this only happens with the SD cards 2010 q5 3.2 premium plus prestige

mr-fix.info říká:
Please check with diagnostic interface if Component Protection is not on.
Steve Peterson říká:

Thanks! Got rid of all the MMI gremlins that starting appearing after the puppy stepped on who knows what combination of buttons. Happy 2006 A6 owner.

mr-fix.info říká:
Rádi pomohou!
ed říká:

What do you do next if the re-boot doesn’t work? I have a 2008 Q7 and the MMI went dark abruptly just like a lot of the other vehicles. I checked all the fuses, connections etc etc and everything checks out fine. Tried the re-boot a few times and the system is dead as a door nail. Ed

Nikos říká:

On a 2009 Q7 (LHD) the above procedure does not work. The SW version is 5570. Is there any other way to reset MMI? I am trying to do it because the Reversing camera stopped working and the Navigation says “Please enter the DVD” even though the Map DVD is in the changer in the boot…

mr-fix.info říká:
Please check if you don’t have a leak in your trunk. Check all modules under the floor.
Tarek říká:
audi a6 2009 mmi not work
Arthur říká:

My Audi Q3 2016 multimedia stopped working today. It won’t force restart and it only plays the radio, but all the information on the screen is gone. It just shows some lines and colors on each display.

Janička říká:

I have a 2017 A4 Allroad and the MMI reset was easy but didn’t solve my problem; Vehicle Drive Select is in Red and won’t let me change the drive mode (into off road or otherwise). Trunk door foot release isn’t working either. What a pain!

mr-fix.info říká:
Best if you run diagnostic of your car.
Joe říká:

2005 A8. I reset the MMI and now it will not turn back on. Tried to connect with VCDS and it says it cannot communicate with the controller. Fuses are all good and I disconnected the battery to try to reset it.

ČTĚTE VÍCE
How do you open a gas fuel door?

Pingback: Google Earth greyed out — Audi A5 Forum & Audi S5 Forum
Josh Turner říká:
How do you clear the call logo on Audi a1 screen?
Kevin p říká:

My battery died and when I jumped the car, the screen will not turn on at all. I tried the three button trick with no luck. Any other suggestions?

mr-fix.info říká:
Zkontrolujte pojistky.
Kevin p říká:

Checked fuses. Ordered new radio and installed. Testing now but nothing. Hard reset goes to welcome screen then off. Is there a safe code?

G Band říká:
Audi Q7 09plate mmi system won’t boot and no lights on my control panel any help welcome many thanks
mr-fix.info říká:

Start with checking fuses. Then best if you run full system diagnostics with VCDS or other diagnostic tool.

Přečtěte si je říká:

Hi , I hope you can help I’ve tried resetting my mmi system with the button combination but my system won’t let me select the Bluetooth function . I’ve got a 2011 a1 fsi. Thanks for the help

david říká:

audi q7 57plate mmi system. Everything is working but ‘time and date’ setup dont (upper-left button), when I try to open ‘time and date’ setup it does appier on the screen but just for a second and returns to a previous setups

Paul Smith říká:

Software or hardware problem? I have Audi MMI 2g and sat nav disc which work fine for 5-10 mins then message to say media not recognised, if I reset using 3 buttons it starts to work then goes off again. Also seems laggy and slow now as well. Disc is not scratched.
Díky

mr-fix.info říká:
I would try with different disc anyway. The run a full diagnostic scan on the car.
Pauline říká:
I have an audi 2010 convertible radio works but cd and sd card just doesnt read anything please help
Pzille říká:

I have a 2013 q7 and don’t know how to navigate to the aas screen. It is not under the car selection is there a hidden menu? Also don’t have a SETUP button.

Ramona říká:

Buna ziua! La un audi q5, apare pe ecranMMI3G EM APP 21.29.1642
AppFPGA îs valid!
WE WILL DO NOTHING!
Ecranul nu se Închide nuci la scoaterea chei din contact!

dominik izbinski říká:

Hi I own a audi a6 2012 and the mmi doesn’t open automatically when I start the car I have to do it manually also when i turn off the car the mmi doesn’t close any help ?

Marc Rainey říká:

My sound just went out in my 2014 Audi Q7. My radio was working while driving my son to school, turned off the car took my son to school and within 5 minutes I’m back in the car and the radio turns on but no sound… please help!

Coness říká:

Can I access red engineering menu without having to do anything with vagcom? I tried to push Car + Back buttons for 5 seconds and that doesn’t work. I have a 2015 C7 A6 premium plus. I have 3g+

Sam Shaw říká:

I have an 2006 A6 3.2
It has a motarolla in car phone
The MMI now comes up with no phone installed
Up until now it has been all ok
můžete pomoci
the hand set also appears not to be charging I have replaced the battery

ČTĚTE VÍCE
How do you fix an engine shudder?

mousa ahmed abed říká:
hi
audi q72015 mmi 3g green menu original factory setup
i need how do that
Mark říká:

My Audi 2010 S5 MMII the phone Bluetooth hooks up, it receives and makes calls but no should. I’ve rebooted and reconnected my iPhone X and nothing changes. It was working fine until I opted to take the call on my iPhone and had to select audio, iPhone several times before it switched to my phone: thanks!

Colin Mccarthy říká:

Sat nav and media will not initialise on 2014 A4, have reset using the three buttons which works but does not help media or satnav get past initialising, many thanks in anticipation.

Sorin říká:

Where MMI modules (each computing, radio, cd, navigation, phone, gateway, etc.) are located on an Audi Q5 (8R) 2.0 Quattro from 2009

Sorin říká:

Please help me with a MMI repair manual for an Audi Q5 Quattro 2.0, 2009, no longer running radio, cd, navigation, phone, screen displaying MMI 2G, I’m interested in where the computers of the above components are positioned to replace each module with a fiber optic and see which one is faulty (knowing that if a module is faulty, no one is working within the optical fiber, Va thanks in advance, Sorin, alien2006ms@gmail.com

Musheer Ahamed říká:

Audi A4 2011, When i tries to connect my iPhone via bluetooth. When i select ” Tell ” the message says ” Telephone is not available”
And when i go to the setting Telephone setting is in hidden option, not able to select.. can some one please help to connect?

Musheer Ahamed říká:

Audi A4 2011, When i tries to connect my iPhone via Bluetooth. When i select ” Tell ” the message says ” Telephone is not available” And when i go to the setting Telephone setting is in hidden option, not able to select.. can some one please help to connect?

Hi my 2015 audi a4 radio and mmi just stopped working have checked all the fuses and they are ok does anyone know what the problem will be

Steven Roper říká:

Hi their have an a5 with mmi screen back light lights up but now is no longer displaying an image been coming and going for a few weeks before is this software or the screen itself … its the poor mans mmi as its the concert stereo with the interface buttons on the dash not behind the gear stick

Chris Gerber říká:

2012 Audi A8 green arrows to raise the suspension are greyed out, wheel change option comes back on after 15 seconds

Dashmeet říká:

Hii everyone i have audi a4 1.8t 2008 model . My music interference is not working it charges phone but doesnt get connected to the system and it always show error ur device may not be connected or operating properly what the way by which i could make it work ! Does it need to be reprogrammed or something is missing from the car as its been just 2 month i have bought this machine . Your help and guidance will be much appreciated thanks

ČTĚTE VÍCE
Jak používáte pohon všech čtyř kol na FJ Cruiser?

Bhupendrasinh Gohil říká:

I have removed battery terminal and when I fix it then music system show the Audi infotainment system and music system does not work

David říká:

Sorry for hijacking thread. I have a 2010 Q7 and I have to reboot my MMI if the car sits off for more than 45 minutes. why is it doing this?

Mindaugas říká:
Hi, my audi 2009 a6, no Work mmi, but vcds show me radio not be reached, can you help?
Detricku říká:
Is there a button combination for the red (engineering) screen for the rear seat entertainment?
STEPHEN říká:

Dobrý den,
I had a liquid spill on my MMI control panel (A6 Avant 2008). Over time all the buttons ceased to work but I could still control it from the steering wheel. Every so often the control panel would light up and some buttons would work but very rarely. I’m guessing that one of these times I accidentally hit the off button and then had no way of turning the system back on. I managed to take the centre console apart and open the control panel. The circuit board was pretty sticky but I gave it a good clean and everything bar one function works now. Unfortunately the one thing not working is the centre knob/wheel. The press down button on the function of the knob works fine but when I turn it, it doesn’t scroll through the options like it should. When I have the face off I can control the censors on the circuit board with my finger but when I put the face back on and trythe knob for real I get nothing. Could you please give me some advice or trouble shooting tips. I thought about resetting the system but didn’t know if that would work also I was worried that I would lose all my programmed stations and have no way of retuning because the knob isn’t working (I’m guessing that a reset clears all tuned stations?).

George říká:

2012 Q7 with 3G+ now has red screen on when starting after trying to update to 2019 firmware. Any way to fix this or is it bricked!?

Hi, can you help? I have a Audi A5 2013 I can use my phone for calls but not for music, I have tried to access the green screen but it does not let me, any advice would be most appreciated thanks in advance

Eduardo51 říká:
Thank you for the post. My mmi it’s on black screen. I don’t know to reset total the mmi.
mr-fix.info říká:

If possible use diagnostic tool to check for faults in MMI and related units (GPS, amplifier, phone).

Komentáře jsou uzavřeny.

OEM systémy

  • MFD 1 (VW, Škoda, Seat, Ford)
  • Audi MMI 2G
  • Audi MMI 3G
  • Audi RMC
  • Audi RNS-D
  • Audi RNS-E
  • BMW iDrive
  • Mitsubishi MMCS
  • Navigační systém NB1 (Mazda)
  • RNEG (Peugeot, Fiat, Lancia)
  • RNS 510/810, Columbus (VW, Škoda, Seat)

Populární témata

  • CarPlay & AndroidAuto
  • Coding & Adaptation tweaks
  • Skryté menu
  • Informační a zábavní systémy
  • Remote battery change
  • Bezpečnost a zabezpečení
  • Service & Oil reset