Updated to the new ios 10 when it was released. However, now when I plug my iPhone 6 into my Ford SYNC using usb — lightning cord, the music plays out my phone speakers instead of car but still charges. No option to switch input to car from phone. Been having to resort to using the bluetooth which drains battery and cannot use sync to voice command song requests. Never had this issue before the update. anyone else having this problem?

Zobrazit více Méně

iPhone 6, iOS 10, Slate Grey 64GB

Publikováno 15. září 2016 12:36

Me too (1199) Me too Me too (1199) Me too Odpovědět
22 odpoví

Načítání obsahu stránky

Obsah stránky načten

Uživatelská úroveň: Úroveň 1

I was also having this problem with the USB connection in my 2009 Acura TL. A hardware reboot seems to have fixed the problem so far. I am running iOS 10.2 and have had the problem since upgrading to 10.xx. The reboot has also fixed the problem I was having with the music app not advancing to the next song, whether in order or shuffled. I was only able to advance songs manually.

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

Mám stejný problém.

I drove to work on iOS9, audio playing just fine out of my car (Fiat Panda, Blue&Me system, connected via Lightning cable).

Updated at work to iOS10, suddenly the car doesn’t pick up any audio output from the phone. The phone still charges, however.

The phone says it’s outputting to «Dock Audio», but the car says «No Source Available».

The only way I can use Bluetooth is to use a dongle and cable to the Aux port, so not really a good long-term solution.

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

I am having the same problem with my iPhone 6s Plus. I have it plugged into the USB of my kenwood stereo in my car. I can charge it from the stereo and skip songs from the stereo buttons, but sound only comes out of the phone speakers. This is very frustrating because I don’t like Bluetooth. Any help would be great.

ČTĚTE VÍCE
Co je v USA levnější než v Evropě?

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

I have the same issue connecting to my car stereo via USB (not carplay). The Stereo recognizes that a device is plugged into it, but the iPhone doesn’t recognize it as an output device and only uses it to charge. (It is not selectable either)

The Stereo is a Kenwood dpx501bt if it matters.

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

I had a friend plug their iPhone 6s running ios10 into my kenwood USB and the audio worked fine, while my 6s plus doesn’t. This is somewhat comforting. I’m going to try a restore and see if that fixes this glitch.

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

I can also confirm that this issue is present in every USB audio device I’ve tried (multiple car audio systems).

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

I experience the same issue with an iPhone 6, iOS 10.0, 10.1, and 10.2

addionally, any USB audio target (like a USB DAC connected via CCK) no longer works.

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

Count me in. After installing the iOS 10.0.2 update, When plugged into the USB port, my iPhone 6 plays music from the iPhone speakers while the song playing is displayed on the Pioneer radio in my car. I can find no way to route the music back to USB.

When I updated to iOS 10.0, this was not a problem.

Zobrazit více Méně
Uživatelská úroveň: Úroveň 1

Ok. I did a hard reset on the iPhone after 10.0.2 didn’t fix the issue. I did ne restore any settings or data.

It now worked in the car again.

I did another hard reset and restored everything. It was no longer working in the car.

Therefore my personal solution looks like it’s going to be a hard reset and manually reinstalling everything. I’ll start with Google Music and pulling my audiobooks out of iTunes, then testing again. As long as that’s OK, I can’t see that I’ve got anything else that would interfere with it, so I’ll have to reinstall all my other apps.

ČTĚTE VÍCE
Kolik litrů pojme 1.2 Fiesta?

Irritating, but as long as it works, I can live with it. need to remember to delete all backups once it’s done and confirmed working, then take a brand new one.

I’ll post an update once it’s all finished, in case this helps anyone else.